Before the cold weather hits, run through this quick checklist for your generator: ✅ Coolant rated for low temps? ✅ Block heater working? ✅ Battery charger operational?
Watch the full video for all the essential winter prep tips from our EGSA certified technicians. Click here to download the Winter Generator Prep Checklist.
In this Video:
Check Coolant: Ensure your coolant is rated for the upcoming low temperatures [00:05].
Check Block Heater: Verify the block heater is working correctly so the generator can start easily in the cold [00:11].
Check Battery System: Make sure the battery charger is operational [00:17] and that all battery connections, including those at the starters, are tight and secure [00:23].
Check Air Filters: Ensure the air filters are clean [00:31].
Grease Bearings: If your gen-end has a greasable bearing, make sure to grease it using the correct type of grease [00:37].
Check Electrical Leads: Confirm that the leads at the breaker and within the gen-end are tight [00:42].
Perform Regular Maintenance: Change the oil and fuel filters every 250 hours [00:47].
Test the Unit: It is recommended to have the unit load bank tested every six months [00:54].