Skip to content

What to Know Before You Buy a Standby Generator for Your Business

By Dakotah Merkley, Senior Vice President

A lot of the calls we get start the same way. Somebody just went through an outage, or they’re building something new, and they want to know what a standby generator is going to cost and which one they should get. Fair questions. The real answer is it depends, so I want to walk through what it actually depends on. 

Power is insatiable right now. Everything we do in our lives is demanding power at an extreme rate, and the grid is feeling it. In July 2025 the U.S. Department of Energy released a grid reliability report warning that with projected load growth, planned power plant retirements could raise the risk of outages 100 times by 2030. That’s created a lot of urgency behind people wanting to install generators, which pushes lead times back and drives up the cost of new units. 

So if you’re shopping for a standby generator for your business, here’s what I’d want you to know before you sign anything. 

What is a standby generator? 

A standby generator is a permanently installed generator wired into your building through an automatic transfer switch, or ATS. When utility power drops, the ATS senses it and tells the generator to start. Once the generator is up to speed, the ATS moves your load over, and when the grid comes back it switches you back and lets the generator cool down on its own. Nobody has to run outside and pull a cord. 

A portable generator is something you tow or roll to where you need it and hook up by hand. That works great on a construction site or for a planned shutdown. If your business can’t afford to sit dark while somebody drives over and connects cable, you want standby, because it’s going to start without anybody touching it. 

For hospitals and other life safety applications, NFPA 110 sets the bar. A Type 10 system has to be up and running and taking load within 10 seconds. When you’ve got a patient on an operating table or a mom giving birth, those 10 seconds matter, and that’s why we put so much weight on keeping these units maintained. 

Diesel, natural gas or propane: picking your fuel 

Fuel is usually the first real decision, and it shapes a lot of what comes after it. 

Diesel 

Diesel is still the workhorse for commercial standby, especially once you get into the bigger kW ranges. The fuel sits right there on site in the tank, so you’ve got an in-house solution that doesn’t depend on anybody else’s infrastructure while the grid is down. Diesel units also tend to handle big block loads well when they kick on. 

The tradeoff is that diesel needs looking after. It can break down sitting in a tank, and once temps drop below freezing, untreated diesel can start to cloud up and gel. Here in Colorado and down in Texas, that’s a real problem during deep freezes. We switch to winterized diesel months in advance and offer fuel polishing to keep that fuel clean and stabilized. 

Natural gas emergency generators 

A natural gas emergency generator runs off your utility gas line, so there’s no tank to fill and no fuel going stale. A lot of businesses like that, and we’ve seen a big push toward natural gas over the last few years. 

The thing to think about is that you’re relying on the gas utility to keep that line pressurized during whatever event knocked your power out. For life safety applications, some engineers and local authorities want fuel stored on site, so check with your engineer and your AHJ before you commit. There’s also bi-fuel equipment that starts on diesel and blends in natural gas once it’s running, which stretches your diesel runtime a long way. 

Propane generators and propane backup generators 

A propane generator stores its fuel on site like diesel, but propane doesn’t go stale sitting in a tank. That makes it a solid fit for a site without a gas line that might sit a long time between outages. Plenty of units can run on either natural gas or propane. 

Two things to watch. Propane units generally top out at smaller sizes than diesel or natural gas, so they’re more common on the lower end of the commercial range. Propane also vaporizes slower in the cold, which matters in a Colorado winter, so your tank has to be sized for the load and the temperature you’ll actually see. 

Sizing it right for 480V and three phase power 

Sizing comes down to two things. How much power you need, measured in kW, and what voltage and phase your building runs on. 

The best place to start is your one-line diagram. That’s the engineering drawing that ties all the electrical in your building back to one point, and it gives us total kW, amperage and voltage so we can size equipment off of it. If you don’t have one handy, our generator sizing tool is a good first pass, and then our team can dial it in with you. 

Most commercial and industrial buildings run three phase power, and a lot of them are on 480V. Smaller commercial spaces are often 208V. A 480V generator won’t do you any good on a 208V building without a transformer, so matching voltage and phase is just as important as getting the kW right. 

A couple of things people miss. Big motor loads like chillers and elevators pull a lot more power on startup than they do running, so the generator has to handle that surge. And bigger isn’t always better. A diesel unit that runs way under its rating for long stretches can start wet stacking, where unburned fuel builds up in the exhaust. We’d rather size you for what you need with some room to grow. 

The biggest generators and three phase portable options 

We carry units from 20kW up past 4MW. When a site needs more than one generator can give, we parallel them so they share the load as one system. 

One of the more complex projects we’ve taken on was three 1.5MW units paralleled together to power a new manufacturing facility outside Houston. The utility was months, if not a few years, out from getting power to the site, so the customer bought three generators from us and we got two of them on site in less than 30 days. Most of the complexity came from changing out control panels, working off the customer’s one-line diagrams and keeping a lot of people in a lot of different states on the same page. 

If you need a large portable generator, our rental fleet covers temporary and emergency power. A three phase portable generator on a trailer is what most commercial sites need for a planned shutdown or a construction project. On the bigger end, we can get a 1.6MW unit on a truck and deployed into our local regions. We’ll need some info from your team on site about connection points, and we can provide cabling and safety protocols so nobody’s tripping over cable. 

What does a standby generator cost? 

I get asked all the time what a Generac costs or how much it is to install a Generac generator. Other folks want to know if CAT runs better than Cummins. There’s no one number, because the generator itself is only part of the bill. 

On the equipment side, new units have gotten expensive and lead times have stretched out with all the demand on the grid. Not everybody has the funds or the want to spend hundreds of thousands of dollars on a brand new generator before cabling and installation even start. That’s where a lot of our customers go with a used unit that’s already been through our 31-point inspection and a full load bank test. 

Installation is where the number moves around the most. You’ve got the transfer switch, cabling, a pad or foundation, fuel, permits and the electrical contractor’s labor. Site requirements play in too. A lot of locations have dBA limits on how loud a generator can be, and the bigger the unit, the more noise it makes. We carry sound attenuated enclosures from 20kW up to 2MW, and there are other ways to bring the noise down through mufflers and how air moves around the unit. 

As for brand loyalty, it really depends on the application. One brand might be more consistent for prime power and another for standby. Because we inspect and load bank everything we sell, you’ve got our backing no matter whose name is on the side. 

The way I’d look at cost is the way we look at it in our own business. What does one day down mean for you? What about one week? Think of a generator as an insurance policy. It keeps your business up and running and keeps your employees with a place to come to work so they can feed their families. 

Keeping it ready once it’s in 

A standby generator only earns its keep if it starts when you need it. One of the most common failure-to-start calls we see is honestly just somebody forgetting to keep fuel in it. The worst thing that can happen is you skip preventative maintenance and an outage turns into an emergency. 

That’s why we push PM agreements. Every branch runs a 31-point inspection on site, top to bottom, left to right on the generator, and you get that document back showing where your unit stands and what we recommend. Load bank testing is the other big piece. Think of it as a dyno test for a generator. We put it under load and check that it’s producing the right voltage with no cylinders running hot. 

We also track every unit’s load bank history by serial number or whatever name you use on site, so you’ve always got a record to hand an inspector. 

Standby generator FAQ 

What is a standby generator? A standby generator is a permanently installed generator connected to a building through an automatic transfer switch. It starts on its own when utility power fails and shuts down after power comes back. 

Should my business get a propane, natural gas or diesel generator? It depends on the size you need and how you’ll use it. Diesel stores fuel on site and covers the widest size range. Natural gas runs off the utility line with no refueling. Propane stores on site without going stale but tops out at smaller sizes. For life safety applications, check your engineer’s specs and your local AHJ. 

How much does it cost to install a commercial standby generator? Install cost depends on the transfer switch, cabling, pad, fuel, permits, sound requirements and contractor labor, so it varies site to site. Generator Source quotes every project individually. Reach out to your nearest branch for a quote. 

What’s the biggest generator Generator Source carries? Generator Source sells and rents commercial and industrial generators from 20kW to over 4MW, and can parallel multiple units for larger loads. 

Can I rent a three phase portable generator? Yes. Generator Source rents three phase portable generators for temporary and emergency power, including large trailer-mounted units in the megawatt range. 

Do you sell 5,000 or 10,000 watt generators for homes? No. Generator Source only works with commercial and industrial generators 20kW and up. For a home generator, a local residential dealer or electrician is the right call. 

Will you buy my used generator? Yes. Send us pictures and any service records you have, and we’ll give you a fair upfront cash offer. Payment is wired 24 to 48 hours before we load it, and we handle getting it off your site. 

Let us help you figure it out 

We understand generators aren’t your expertise. You’ve got a business to run. Generators are ours, and we’re a family first company, so when we come out to your site we want it to feel like your neighbor is coming over to help. If you’ve got questions about sizing, fuel, sound requirements or whether a used unit makes sense for you, reach out to any of us at any point in time, including me. We’d love to be there for you. 

Request a quote or try our sizing tool at generatorsource.com, or find your local team: